![]() ![]() This includes fitting smaller drums or discs and machining drums or discs beyond the limits set by the component manufacturer.Īll brake components shall clear other vehicle components such as wheels, suspension and steering components.īrake components and brake lines must be mounted in areas where they are not likely to be struck by objects thrown up from the road. all brake tubing and flexible brake hoses must conform to Australian Design Rules.īrakes must not be altered in any way that would reduce braking efficiency.the installation is in accordance with the manufacturer's specifications.all components of the braking system are compatible and are unmodified.front to rear brake balance is compatible and does not result in excessive wheel lockup of one axle during braking.the brake master cylinder has adequate brake fluid in the reservoir (disc brake systems usually require a larger reservoir). ![]() If brakes are upgraded - eg front brakes changed from drum to disc, it is essential that: When the brake system of an early model vehicle is modified, it is recommended that a dual or split circuit brake system be fitted. When brakes are upgraded using components or systems which were not standard options for the vehicle, a Statement of Requirements or a report from an MR426 Chartered professional engineers (507.1 KB PDF) may be necessary. It is recommended that braking modifications are carried out using production components that themselves do not require modification.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |